D-Sub DIN · CECC · IEC Pillar. 1) Not normally kept in stock. Performance levels. Explanations see page þ. Buy DIN () Rack And Panel Connectors, Trapezoidal, Round Contacts Diameter 1 Mm; Common Mounting Features And Dimensions, Survey . Buy DIN RACK AND PANEL CONNECTORS, TRAPEZOIDAL, ROUND CONTACTS DIAMETER 1 MM; RATINGS, REQUIREMENTS, TESTS.
|Published (Last):||5 September 2012|
|PDF File Size:||6.16 Mb|
|ePub File Size:||17.83 Mb|
|Price:||Free* [*Free Regsitration Required]|
It was particularly popular as a connector for various home computers and video game consoles. Some manufacturers offered panel-mounted jacks dkn potential-free auxiliary contacts that would open if a plug were inserted.
Radio amateurs and small cooperatives quickly discovered these reliable connectors and began to put them into almost every low frequency signal device, often with non-standard pin usage.
There are seven common patterns, with any number of pins from three to eight. The original DIN standards for these connectors are no longer in print and have been replaced rin the equivalent international standard IEC This article is about the standard connector.
The connectors on the cord are connected pin for pin, pin 1 to pin 1, etc. Save to parts list Save to parts list. The male version has a central flat pin, and circular pin mounted off-centre. Archived from the original PDF on 20 July This connector was commonly referred to as the “Bleecon”,  an example of its use is the Strand Tempus range of theatrical lighting dimmers and control desks.
Audiovisual, video and television equipment and systems — Part 3: Specification for connectors for the interconnection of equipment in audiovisual systems. Please enter a message.
This page was last edited on 20 Decemberat Zero 88, Anytronics, Lightprocessor and Strand have the control signals on pins0V on pin 416552 and power on pin 7 and Pulsar and Clay Paky have power on pin 1, 0V on pin 2 and channel outputs on pins 3 to 8.
Belling Lee offered a version with a sprung-loaded collar which latched on insertion but required the collar to be pulled back to release the connector, similar to the LEMO B series connector. However, as the keying is consistent across all connectors, it does not prevent incompatible connectors from mating, which can lead to damage; this 41562 changed in Mini-DINwhich keys different connectors.
Screw-locking versions of this connector have also been used in instrumentation, process control and professional audio.
DIN connector – Wikipedia
This article needs additional citations for verification. Some DIN connector standards are:. Versions other than 3 or 5-pin were very rare in the USSR and very hard to buy. Save this item to a new parts list.
The plugs consist of a circular shielding xin skirt protecting a number of straight round pins. A polarised two-pin unshielded connector, designed for connecting a loudspeaker to a power amplifier or other device; many of the earlier shoebox style tape recorders sin themis known as the DIN loudspeaker connector.
AISG 13 June Sending feedback, please wait Additionally, some “domino” 5-pin connectors had a keyway on opposing sides of the plug, allowing it to be reversed.
A version with a bayonet locking ring was used on portable tape recorders, dictation machines and lighting dimmers and controls through the from vin s to the s, an example of this is the microphone input connector and some others on the “Report” family of UHER brand tape recorders.
Views Read Edit View history. Audio and video connectors. Holes on female connectors are also numberedbut from left to right facing the holes.